Friday 31 October 2014

A simple little Orchard


Following BLAM last month I promised myself that I would take a break from building and painting for at least four weeks. I so nearly did it but the craving to construct something new and slap some paint on it was just too strong.

This enforced absence was cut short when a large parcel from China arrived on my doorstep. What could this be? Id completely forgotten that I had bought several flocked trees from china. Indeed over 60 of them retailing in at a total cost of around £35. Most of mine are at the larger end of size 12cm+

I’d bought tall poplars, oaks, willows and other deciduous varieties. I also bought some fruit trees.
And it’s the last lot I am going to start with first for my Orchard.

A couple of years back I bought some resin stone walls including corner sections. Apologies I can’t remember the vendor but these were painted up black and dry brushed greys. It was then a simple job of laying these out on a piece of ply I had knocking around to form the perimeter of the orchard. These were fixed to the base using a new purchase – a hot glue gun.
 



 

The glue set immediately so I could start on the next stage putting down the basing material. In this case a mix of builders sand and railway model ballast. This was glued to the base surface using PVA. Once dry after a couple of hours the base was painted dark brown and then highlighted.



 

Over the last few weeks I have been buying off ebay several bags of static grass and flock. I have now got a stock that will last me a life time. Seriously folks there is so much cheap stuff being knocked out on the ebay site I don’t think I have paid full price for any foliage or basing terrain stuff in the past two years. A suitable mix of these was then glued to the painted base and left to dry.





Once all this was dry I could turn my attention to the trees. Orchard’s are typically laid out in a grid pattern and mine would be no different. With 10 trees purchased I decided on two rows of four thereby giving loads of room around the edges and a couple spare. These were fixed to the board by drilling holes in the baseboard and then the trees fixed in these holes using both superglue and the hot glue gun.

 


A word of caution the flock on some of these chinese sourced trees is lose so a good spray of either wet scenic cement of cheap hairspray will help to keep them happy. The stuff that had fallen off in the bag I used as additional scatter around the base of the trees to signify fallen leaves and fruit.
 WW1 Troopers take position in a French Orchard

 

So there we have it – a small Apple Orchard fit to grace many a table of countless historical periods

 

Until next time

9 comments:

  1. I really like that. Or you could put headstones inside the walls to make it a cemetery!

    ReplyDelete
  2. Excellent work, as always. I like your techniques and always learn something new coming here!

    ReplyDelete
  3. Nice, I am going to have to do that!

    ReplyDelete
  4. Cracking stuff. I'm seriously tempted to make one myself.

    ReplyDelete
  5. That is amazing. Definitely going to 'borrow' that idea.

    ReplyDelete
  6. If initiation is the most sincere form of flattery than you should be rightfully chuffed with all these gamers wanting to build one also Eric.

    Anyone found a good (cheap) source of stone walls?

    ReplyDelete