▼

Pages

▼

Tuesday, 1 September 2015

28mm Flying Saucer / UFO part 2

Hi Folks

Managed to get a bit more work done on the flying saucer last night...

Part 1 can be found here...

http://shedwars.blogspot.co.uk/2015/08/28mm-flying-saucer-ufo-part-1.html

First up I felt that the side wall needed some embellishment - this was provided by some old games workshop bases I had knocking around.



I then turned my attention to the landing gear. I decided quite early on that this would be a separate piece - that way I could display the saucer both in flight and on the ground.

The 'legs' are actually plumbing fittings - a bag of ten cost around £11. These were fixed to a card disk (on which will sit the saucer). To give them more weight I added a 25mm washer 'foot'.








Once these were dry the whole thing got its first primer coat and then the first 'silver coat' - metallic Volvo Silver from Halfords





I still need to complete the paiont job but I thought you might like to see the craft with some of its occupants...this is a big saucer




I should hopefully get this completed later in the week...

Until next time

at

11 comments:

  1. lrqan1 September 2015 at 18:03

    Really effective.

    ReplyDelete
  2. Jay White1 September 2015 at 18:53

    Outstanding! I want to go play Xcom UFO Defence now for some reason ;-)

    ReplyDelete
  3. Clint1 September 2015 at 18:56

    Quite convincing. A very good project and an easy one for idiots like me!

    ReplyDelete
  4. Herbert West1 September 2015 at 19:58

    Lovely work; such a simple and elegant idea. And it looks better than the one in The Dalek Invasion of Earth!

    ReplyDelete
  5. TamsinP1 September 2015 at 20:04

    All it needs now is a ramp for the occupants to glide down. Or stairs ;)

    ReplyDelete
  6. A J1 September 2015 at 20:13

    Nice work!

    ReplyDelete
  7. Jay1 September 2015 at 20:39

    Sweet!!

    ReplyDelete
  8. Galdarbjelke1 September 2015 at 21:03

    -To the Tardis, Doctor! To the Tardis!!

    ReplyDelete
  9. Carrion Crow1 September 2015 at 21:24

    Excellent work, Eric! The combination of disparate elements into an effective model is brilliant. However, for some reason I'm imagining this floating next to your dock, with daleks trundling across a gangway to do battle with the local constabulary...

    ReplyDelete
  10. Thomas Nissvik8 September 2015 at 10:33

    I love this! My Mantic Martians need a ride, something like this might just be the thing. Really looking forward to seeing how this turns out painted.

    ReplyDelete
  11. KEV. Robertson.16 June 2017 at 14:00

    Great idea! Works brilliant...like to do similar model- if can find some plastic hub caps. Cheers.

    ReplyDelete